On SaleNEW

Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)

Supports PoE Power up to 30W for each PoE port;

Auto detect power device; will not burned non-standard PoE device or normal PoE switch;

Supports port power supply prioritization, guarantee the continuous power supply of key nodes;

Supports IEEE802.3 x full duplex flow control and Backpressure half duplex flow control;

Line-speed forwarding, intelligent identification

Supports storage – and- forward for Data exchange;

Support RJ45 Auto-MDI/MDIX

	NSW2010-18GT2GP-POE-IN
Hardware Specification
Ports Type	16×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports（SFP）
Standards	IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at
Switching capacity	40Gbps
MAC	8K
Packet Buffer	4M bit
Forwarding performance	29.76Mpps
Power supply	AC: 100-240 V, 50/60 Hz
PoE	support POE
Max. PoE Power	Max capacity: 185W, Max capacity for single port: 30W
Cooling Fans	1
Weight	<4.2 kg
Indicator	PWR (Green), LNK/ACT (Green), PoE (Orange)
Storage Temperature	-40 °C ~ 70 °C
Operating temperature	0 °C ~ 40 °C (32 °F ~ 104 °F)
Operating humidity	10%～90% (noncondensing)
Storage humidity	5%～90% (noncondensing)
Dimensions (W×D×H)	280mm x 180mm x 44mm (11″×7.1″×1.7″)
Working Mode	Default(Normal mode) : All ports can communicate with each other., VLAN(Secure mode): Downlink ports can communicate only with uplink ports., Extend(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports.

•16 Port Gigabit PoE Switch with (16) 1000Mbps PoE Ports and (2) 1000Mbps Uplink Port. – Max capacity: 250W
Max capacity for single port: 30W – 2 SFP

There are no reviews yet.

Be the first to review “Ethernet Switch NSW2010 18GT2GP POE”

Ethernet Switch NSW2010 18GT2GP POE