• Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)
• Supports PoE Power up to 30W for each PoE port;
• Auto detect power device; will not burned non-standard PoE device or normal PoE switch;
• Supports port power supply prioritization, guarantee the continuous power supply of key nodes;
• Supports IEEE802.3 x full duplex flow control and Backpressure half duplex flow control;
• Line-speed forwarding, intelligent identification
• Supports storage – and- forward for Data exchange
Max capacity: 60W
Max capacity for single port: 30W
Max capacity: 120W
Max capacity for single port: 30W
Max capacity: 185W
Max capacity for single port: 30W
Max capacity: 370W
Max capacity for single port: 30W
Cooling Fans
0
1
1
2
Operating Temperature
0°C ~ 40 °C
Storage Temperature
-40 °C ~ 70 °C
Operating Humidity
10% ~ 90% non-condensing
Storage Humidity
5% ~ 90% non-condensing
EMC
FCC (47 CFR Part 15, Support B); CE-EMC (EN 55032: 2015, EN 61000-3-2, 2014, EN 61000-3-3: 2013, EN 55024: 2010 +A1: 2015); RCM (AS/NZS CISPR 32; 2015); IC (ICES-003: Issue 6, 2016)
Safety
CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013)
Indicator
PWR(Green), LNK/ACT(Green), PoE(Orange)
Working Mode
No
Default(Normal mode) : All ports can communicate with each other.
VLAN(Secure mode): Downlink ports can communicate only with uplink ports.
EXTEND(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports.
•4×1000Mbps PoE ports (RJ45)+1×1000Mbps ports(RJ45) -Capacity 10Gbps- Max capacity: 60W
Max capacity for single port: 30W
Reviews
There are no reviews yet.
Be the first to review “Ethernet Switch NSW2010 5GT POE” Cancel reply
Reviews
There are no reviews yet.